English 中文版
 
 
 
ABOUT US CULTURE LOCATION CONTACT US
 
 
 
 
 
NEWS
 
To teach how to use the repair car jack

发布时间:2015.05.08    新闻来源:Taizhou Ju da Tools Co., Ltd.   浏览次数:
 

The vehicle is hydraulic jack, will not start the engine, because the engine vibration or rotation of the wheel, can make the vehicle from sliding down the dangerous jack.

Various models of vehicles to ensure safety, the use of the Jack usually have a fixed position,not by the jack in the bumper, beams and other parts.

Automobile maintenance personnel do not work in the absence of support under the car,replacing the wheel, passengers can not stay in the car, because their movement may cause the vehicle slipped from jack.

If there is no Jack in the hand, can replace the tire according to the different position of differentemergency measures.

Remove wheel lateral tire, the inner wheel can make the car stop with suitable height block of wood or stone on the mat, so that the outer tire hanging replacement. Pay attention to tighten the hand brake and tucked up the front wheel.

Remove the front tires or within the tire, stone or brick car front axle and rear axle pad, in diggingunderneath the tire to be torn down, so that the tire hung can be replaced.

 
 
   About Us         News        Products            Service              Contact Us
 
 
Company Profiles
Corporate Culture
Location
Company News
   
Bus machine
- Combined bus machine
- Portable bus machine
Hydraulic punching machine
- Punching machine
- Openings
Busbar bending, cutting machine
- Busbar cutting machine
- Busbar bending machine
Hydraulic clamp
- Overall Crimping Tool
- Split hydraulic clamp
- Wire crimping machine
- Charge hydraulic clamp
Ultra-high pressure hydraulic pump
- Manual hydraulic pump
- Electric hydraulic pump
- Motor hydraulic pump
Cable cutter
- The overall hydraulic cable cutter
- Split hydraulic cable cutter
- Ratchet cable cutter
Bending machine
- Overall hydraulic pipe bender
- Split hydraulic pipe bender
- Mechanical bending machine
Hydraulic jacks
-The multilevel DFPY jacks
-FPY slim jack
-The RSC short-jack
-The FCY Long jack
-The RCH hollow jack
-FCY double-acting jack
Cable Stripper
Hydraulic Rebar Cutter
Hydraulic Rama
Bus embossing machine
Clamp
Nut Breaking
Flange expansion, the separator
Line tackle
Card line, tight line
Motor cutter grinding
Network
Service Concept
   
Contact
Feedback
Copyright © 2013Yuhuan Junzhan Hydraulic Machinery Co., Ltd.                 TEL: 0576-87420703                   FAX: 0576-87420753                    Technical Support:censt