No matter what kind of mechanical equipment is purchased, corresponding maintenance is required. The correct use of the hydraulic punch, the careful implementation of maintenance and safe operation procedures are the necessary conditions to extend the service life of the equipment and ensure the safety of production. But in the end, what should we do to maintain the hydraulic punch so that its service life can be effectively extended?

1、 Strictly abide by the operating procedures and daily maintenance system

When the hydraulic punching machine is idle and does not work, the power shall be cut off first, then the waste materials between the workbench and the mold shall be cleaned and the lubricating oil shall be used. During this period, the attention shall be paid to that the solenoid valve shall not be filled with water, and the compressed air must be dry. To prevent the dust and metal powder floating in the electric control device of the hydraulic punching machine from entering, it is easy to cause the insulation resistance of the electrical components to drop, which will cause failure and even damage the components.

2、 Regular cleaning

For all mechanical equipment, cleaning is a very important thing. For the hydraulic punching machine, not only the regular cleaning, but also the targeted maintenance is needed. Clean the iron scraps on the hydraulic punch frame and guide rod, add specific lubricating oil for maintenance after cleaning, and adjust various angles of the stainless steel punch.

3、 Fully guarantee the sensitivity of machinery

In order to maintain the long-term sensitivity of electronic and mechanical equipment, it is necessary to keep the internal equipment moist,. It is very important to change the gear oil in the driving gear box of the punch to ensure the long-term wetness of the punch. In addition, in order to ensure the service life of the first-class hydraulic punching machine, it is generally necessary to replace the new machine when it reaches the upper limit of the continuous operation cycle. In the future, it shall be replaced every quarter after use. However, it is necessary to use a high-quality lubricant without color and moisture.

These are the three tips for maintaining the hydraulic punch. Do you know how to carry out daily maintenance? No matter how high quality, perfect hydraulic punching machine will produce a certain degree of wear after a long time of work, which will lead to the increase of working time. Therefore, the daily maintenance of hydraulic punching machine must be highly valued, so that it can work better.