Model: MH-10
Details:
◆ Uses and characteristics: MH-10 manual mechanical punching machine is mainly used for power sector 10KV distribution network cross once, the Eiffel Tower, power plants, substations copper and aluminum row, equipment, clamp, angle, channel, flat iron, red M10 , M12, M16, M18, M20 threaded holes. Because the aircraft does not need the power, it is particularly suitable for the wild, high-altitude and underwater operations. Punching positioning accuracy. No noise, no chips, safe and clean job. Easy to carry.
◆ Accessories: random with mold Φ11, Φ13, Φ17, Φ19, Φ21 five pay. The rest of the mold to be customized.
◆ Technical parameters: 1. Contribute: 20T. 2. Maximum punching thickness of: copper, aluminum: 12mm; iron: 10mm. 3 Throat depth: 40mm
Weight: 16kg. Dimensions: 400x240x160
◆ operating method: (1) selection of the desired aperture supporting the punch and die, installation to the host-mode head. The workpiece into the die openings aligned with the engraved lines, turn the die clamp the workpiece. Shake the handle, punch down, punching.
◆ Note:
Pre-operational checks whether the punch and lower die facilities, otherwise it will damage the host.
2. Before punching die must first compress the workpiece.
Operation such as abnormal failure should immediately stop punching, pending troubleshooting after opening.
4 screw, wire mother often filling oil.
◆ Packing: wooden box |
